The Cast Crate ATEM Mini stand is easy to assemble:
1. One end bracket has an “R” stamped on one side and the other end has an “L” stamped on one side. The letter “R” is for right side and the “L” is for the left side. Both ends are actually interchangeable. We marked one left and one right as they have slight bevel on the slot on the inside of the bracket. This was done to allow easy assembly, while allowing a tight fit.
2. Place the right side on a flat hard surface such as a counter top with the letter “R” on the side facing up.
3. Insert the right edge (Stream Deck end) into the slot of the right end piece and press down firmly. The slot is slightly waxed to help with assembly.
4. Repeat this procedure with the left side.
5. The oval cut out is for an SSD. We placed a piece of foam in ours on the back side of the faceplate that keeps our SSD drive conveniently located on the panel.